Investigation into the Parameters of Driver Circuits for Power Electronic and DC-DC Converters

  • Evgeni Nikolaev Malev Technical University of Varna
Keywords: MATLAB, simulation software, integrated circuit, DC-DC converter, driver circuit

Abstract

The paper focuses exclusively on the analysis of the simulation software and the main parameters of the driver circuits for power electronic converters. A mathematical model of the driver circuit in the Matlab Simunink software environment has been created. This model enables the analysis of the process of frequency formation through the boostrap capacitor and examines the interaction between the protection of the scheme at  ,  and the other digital blocks in the circuit. Considered, additionally, are the basic physical processes behavior of a driver with a similar structure in Infineon designer.

References

Stievano I. S., Canavero F. G. ,Maio I. A.(2003). On the behavioral modeling of integrated circuit  output buffers, Electrical Performance of Electrical Packaging (IEEE Cat. No. 03TH8710), Princeton, NJ, USA. pp. 281-284.
Crossref


Lee, H. H. S., & Chakrabarty, K. (2009). Test challenges for 3D integrated circuits. IEEE Design & Test of Computers26(5), 26-35.
Crossref


Martínez-Nieto A., Medrano N., Sanz-Pascual M. T., & Calvo B.(2018). An Accurate Analysis Method for Complex IC Analog Neural Network-Based Systems Using High-Level Software Tools. IEEE  9th Latin American Symposium on Circuits & Systems (LASCAS).
Crossref


Yuan, F., & Opal, A. (2002). An efficient transient analysis algorithm for mildly nonlinear circuits. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems21(6), 662-673.
Crossref


Lee, C. C., Palisoc, A. L., & Min, Y. J. (1989). Thermal analysis of integrated circuit devices and packages. IEEE transactions on components, hybrids, and manufacturing technology12(4), 701-709.
Crossref


IR2301 High and low side driver Datasheet No.PD60201. Infineon Technologies AG. Retrieved May 10, 2021 from https://www.infineon.com


IR2153 Self-oscillating half-bridge driver Datasheet No.PD60062. Infineon Technologies AG.  Retrieved May 10, 2021 from https://www.infineon.com


Shanmugavel, A. (2013). Robust Design for Integrated Circuits.


ADIsimRF Signal Chain Calculator. Analog devices. Retrieved May 10, 2021 from https://www.analog.com/en/design-center/adisimrf.html ADIsimRF Signal Chain Calculator


Wagstaff, R. D. (2003). U.S. Patent No. 6,545,454. Washington, DC: U.S. Patent and Trademark Office.


Niehoff, K., Schreier-Alt, T., Schindler-Saefkow, F., Ansorge, F., & Kittel, H. (2009). Thermo-mechanical stress analysis. In 2009 European Microelectronics and Packaging Conference (pp. 1-5). IEEE.
Google Scholar


Enocksson S. (2011) Modeling in MathWorks Simscape by building a model of an automatic gearbox UPTEC STS11 017
Google Scholar


Karris, S. T. (2012). Electronic Devices and Amplifier Circuits: With MATLAB. Orchard Publications.
Google Scholar


Caspers F., & Kowina P. (2013). RF Measurement Concepts Advanced Accelerator Physics, Trondheim, Norway, 19–29 August 2013, edited by W. Herr, CERN-2014-009 (CERN, Geneva, 2014) pp.105-110


Total number of hits on abstract = 0 times

Downloads for 2021

Download data is not yet available.
Published
2021-06-11
How to Cite
Malev, E. (2021, June 11). Investigation into the Parameters of Driver Circuits for Power Electronic and DC-DC Converters. ANNUAL JOURNAL OF TECHNICAL UNIVERSITY OF VARNA, BULGARIA, 5(1), 56-64. https://doi.org/10.29114/ajtuv.vol5.iss1.210
Section
ELECTRICAL ENGINEERING, ELECTRONICS AND AUTOMATION
Bookmark and Share