Study of the influence of the technological parameters of the air-plasma surface gouging on some quality characteristics in the surface layer

  • Aneliya Mitkova Stoyanova ТУ-Варна
  • Tatyana Mechkarova Technical university of Varna
  • Krastin Yordanov Technical university of Varna
Keywords: air - surface plasma cutting, welding, air - plasma surface gouging

Abstract

The efficient use of resources on the basis of the development of scientific and technical progress requires widespread implementation of new technologies for processing of metals, such as plas-ma, cathode-ray, detonation and other methods that allow to increase the lifetime of machines operation and reduce the materials and energy consumption throughout production.
One of the new highly productive methods for obtaining a high-quality surface is the plasma sur-face processing (gouging) of metals. It is one of the most effective methods for surface pro-cessing applied in modern metal-processing facilities. Unlike other methods for surface pro-cessing this method includes the use of an electric arc and the produced plasma has a tempera-ture which reaches tens of thousands degrees Celsius. At such temperature, not only structural grade steel alloys can be processed, but in-fact all types of metals.
The aim of this paper is to investigate the relation between the technological parameters of the process air-plasma surface gouging and the quality characteristics of the obtained surface lay-ers.
The relations between technological parameters of the process air-plasma surface gouging of metals and quality parameters were obtained by using rotatable design of experiments and re-gression analyses techniques.

References

Georgiev D. S. and Slavov S. D. (2008) Computer based program for automatically design and data processing of experiment results with two-, three- and four-factorial symmetrical experimental plans – EXPLAN, Manufacturing engineering and technology journal, issue 1, Bulgarian Scientific Union of the Mechanical Engineering, ISSN 1312 - 0859, pp. 73 – 79.
Grill A (1994) Cold Plasma in Material Fabrication, From Fundamental to Applications (New York: IEEE Press)
Crossref
Rossnagel S M, Cuomo J J and Westwood W D (eds) 1990 Handbook of Plasma Processing Technology (Park Ridge: Noyes)
Rutscher A. and Deutsch H. (eds) (1983) Wissensspeicher Plasmatechnik (Leipzig: Fachbuch-verlag)
Conrads H., Euringer H. and Schwarz U. (1994) Contributions to High Temperature Plasma Physics ed K H Spatschek (Berlin: Akademie)
Bernard A, Cloth P, Conrads H, Coudeville A, Gourlan G, Jolas A, Maisonnier C and Rager J P (1977) Nucl. Instrum. Methods 145 191
Korzec D, Werner F, Winter R and Engemann J (1996) Plasma Sources Sci. Technol. 5 216
Popov O (ed) (1995) High Density Plasma Sources (Park Ridge: Noyes)
Hopwood J (1992) Plasma Sources Sci. Technol. 1 109
Natsu W., M. Shimoyamada, M. Kunieda, (2006) Study on expansion process of EDM arc plasma, JSME Int. J. 49 600–605.
Crossref
Eubank P.T., M.R. Patal, M.A. Barrufet, B. Bozkurt, (1993) Theoretical models of the electrical discharge machining process III. The variable mass, cylindrical plasma model, J. Appl. Phys. 37 7900–7909.
Crossref
Hung N.P., L.J. Yang, K.W. Leong, (1994) Electro discharge machining of cast metal matrix composites, J. Mater. Process. Technol. 44 229–236.
Crossref
Muller F., J. Monaghan, (2001) Non-conventional machining of particle reinforced metal matrix composites, J. Mater. Process. Technol. 118 278–285.
Crossref

Total number of hits on abstract = 849 times

Downloads for 2020

Download data is not yet available.
Published
2017-12-28
How to Cite
Stoyanova, A., Mechkarova, T., & Yordanov, K. (2017, December 28). Study of the influence of the technological parameters of the air-plasma surface gouging on some quality characteristics in the surface layer. ANNUAL JOURNAL OF TECHNICAL UNIVERSITY OF VARNA, BULGARIA, 1(1), 105-111. https://doi.org/10.29114/ajtuv.vol1.iss1.29
Section
MECHANICS, MATERIALS AND MECHANICAL ENGINEERING
Bookmark and Share