Application of SolidWorks Plastic in the Training in Mechanical Engineering

  • Maria Ivanova Bakalova ТУ-Варна
Keywords: SolidWorks Plastic, injection molding, mechanical engineering

Abstract

Abstract. In this article is presented an example of the application of SolidWorks the training in mechanical engineering. The main features of the design of the parts intended for injection molding are mentioned. SolidWorks allows all these recommendations to be implemented when creating the details. The text explains the simulation settings that are made in SolidWorks Plastics when simulating injection molding. Through a specific example referred to how to make an analysis of the results obtained.

References

Bolur P.C. (2007). A Guide to Injection Moulding of Plastics-3rd Edition. ISBN-13: 978-8190223522. Available from https://www.pitfallsinmolding.com/index.html
Design Guidelines: Plastic Injection. Moulding, Proto labs (2017). Available from https://www.protolabs.co.uk/resources/design-tips/
Engineering Plastics. Part and Mold Design. A Design Guide (2007). LANXESS Corporation. U.S.A. www.US.LANXESS.com
Goodship V. (2004). ARBURG - Practical Guide to Injection Moulding. Rapra Technology Limited Shawbur. Shrewsbury, Shropshire, SY4 4NR, UK. ISBN: 1-85957-444-0
Malloy R.A. (2010). Plastic Part Design for Injection Molding. Hanser Publishers, Munich. ISBN 978-1-56990-436-7
Crossref
Moayyedian M., K. Abhary, R. Marian (2015). Improved gate system for scrap reduction in injection molding processes. 2nd International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC2015,4-6 February 2015, Bali Indonesia. Procedia Manufacturing 2. 246 – 250p.
Crossref
SOLIDWORKS Web Help (2017). Available from http://help.solidworks.com/2018/English/swplastics/c_SOLIDWORKS_Plastics_Welcome.htm
Консулова-Бакалова М., Гр. Василев (2013). Методика за топлинно моделиране на инструментална екипировка. X Международен конгрес "Машини, Технологии, Материали" 2013. 18-20 септември 2013, Варна. сборник с доклади Volume 2: Section Machines, Section Technologies. стр.27-30
Събев П., Б. Вангелов (1989). Шприцформи и пресформи. Техника, София
Тодоров Г., Г. Николчева (2011). Компютърно проектиране и бързо изработване на формообразуващи инструменти със сложни повърхнини. ТУ-София. ISBN 978-954-438-915-4

Total number of hits on abstract = 606 times

Downloads for 2020

Download data is not yet available.
Published
2017-12-28
How to Cite
Bakalova, M. (2017, December 28). Application of SolidWorks Plastic in the Training in Mechanical Engineering. ANNUAL JOURNAL OF TECHNICAL UNIVERSITY OF VARNA, BULGARIA, 1(1), 85-96. https://doi.org/10.29114/ajtuv.vol1.iss1.37
Section
MECHANICS, MATERIALS AND MECHANICAL ENGINEERING
Bookmark and Share