Modeling and performance calculation of a horizontal axis wind and hydrokinetic turbine: Numerical study

Anastas Todorov Yangyozov; Damjanka Stojanova Dimitrova; Lazar Georgiev Panayotov

doi:10.29114/ajtuv.vol2.iss2.95

Anastas Todorov Yangyozov Technical University of Varna, Department of Thermal Engineering, 9010, 1 Studentska Street, Varna, Bulgari
Damjanka Stojanova Dimitrova Technical University of Varna, Department of Thermal Engineering, 9010, 1 Studentska Street, Varna, Bulgari
Lazar Georgiev Panayotov Dobrudja College of Technology-Dobrich, Dobrotica 12, 9302, Dobrich, Bulgaria

DOI: https://doi.org/10.29114/ajtuv.vol2.iss2.95

Keywords: Wind turbine, Hydrokinetic turbine, Numerical analysis, ANSYS CFX

Abstract

A small turbine, working with air and water to generate electricity, was designed and its performance was reported in this paper. The rotor diameter is 150mm. The numerical calculations of the power coefficient, torque, and tip speed ratio of turbine were carried out for a wide range of inlet velocities. The flow passing through the turbine was investigated with commercial CFD code ANSYS CFX 18

References

Moustapha H., M. Zelesky, N. Baines, D. Japikse (2003). Axial and radial turbines. Coincepts NREC

Japikse D. (1986). Advanced experimental techniques in turbomachinery. Coincepts NREC

Japikse D., N. Baines (1997). Introduction to turbomachinery. Coincepts ETI and Oxford University Press

Haller B (1997). Full 3D turbine blade design.VKI Lecture series on secondary and tip clearance flows in axial turbines

Peake S. (2017). Renewable energy: Power for a sustainable future, 4th edition. Oxford university press

Miller H. (1974) The STRAFLO turbine: The realisation of Harza`s idea. Escher Wyss

Sheard G. (2014) Stall detection and control in industrial fans. Sigel press

Djebarri, S., Charpentier, J. F., Scuiller, F., & Benbouzid, M. (2016). Design and performance analysis of double stator axial flux PM generator for rim driven marine current turbines. IEEE Journal of Oceanic Engineering, 41(1), 50-66.
Crossref

ANSYS CFX-Solver Theory Guide. Release 18.1. (April 2017)

ANSYS CFD-Post User`s Guide. Release 18.0. (January 2017)

Menter F. (2003). Turbulenzmodellierung für Aerodynamische Anwendungen. Aerodynamik und Turbulenzmodellierung. Turbulenzmodelle in der Praxis.

Mannwell J.F, Mcgowan J.G, A.L. Rogers (2009). Wind energy explained: Theory, design and application. 2nd edition.

Fleisinger M., M. Vesenjak (2014). Flow driven analysis of a Darrieus water turbine, Strojniški vesnik - Journal of Mechanical Engineering 60 12, 769-776,
Crossref

Total number of hits on abstract = 334 times

Downloads for 2021

Download data is not yet available.